Welcome: Yangzi Graphite Group

service@weldmaterial.com +86-0514-86380222

News

How to choose the suitable gouging carbon rods

How to choose the suitable gouging carbon rods


To select the appropriate air carbon arc gouging carbon rods, the following aspects need to be comprehensively considered:


Working Current
Principle: The working current of air carbon arc gouging carbon rods is related to the diameter of the carbon rods. Carbon rods of different diameters can withstand different currents. If the current is too high, it may cause the carbon rods to burn out, and if the current is too low, it may not be possible to achieve the desired gouging effect.
Selection Method: Select according to the power of the specific air carbon arc gouging equipment and the thickness and hardness of the material to be processed. Generally speaking, for thinner and softer materials, carbon rods with a smaller diameter and a lower current can be selected. For example, for a carbon rod with a diameter of 6mm, the working current may be around 300A. For thick plates or materials with higher hardness, carbon rods with a larger diameter and capable of withstanding a higher current are required. For example, for a carbon rod with a diameter of 10mm, the working current can reach 500A or even higher

D002.jpg

CATEGORIES

CONTACT US

Contact: admin

Phone: +86-13665233012

E-mail: service@weldmaterial.com

Add: Huanghua Industrial park, Jiangdu City, Yangzhou , Jiangsu Provicne, China.